3D printing finds its ’sweet spot’ through ’nifty shades of grey’

Engineers discover new technique to make 3D printing faster and more economical Aerospace and automotive industries will benefit New method could also provide boost to the sports footwear industry - A 'less is more' approach has enabled UK engineers to make 3D printed parts lighter and stronger, using methods that will also make 3D printing faster and more economical. The technique uses a cutting edge process known as high speed sintering (HSS). Unlike commercial 3D printers that use lasers, HSS marks the shape of the part onto powdered plastic using heat-sensitive ink, which is then activated by an infra-red lamp to melt the powder layer by layer and so build up the 3D part. Researchers from the University of Sheffield have discovered they can control the density and strength of the final product by printing the ink at different shades of grey and that the best results are achieved by using less ink than is standard. "All HSS work to date has involved printing 100 per cent black, but this doesn't get the best results," explains Professor of Manufacturing Engineering Neil Hopkinson, from the University of Sheffield. "We found that there is a point at which, as the ink levels increase, the mechanical properties start to reduce. This enabled us to identify the 'sweet spot' at which you can gain maximum strength with the minimum amount of ink." The researchers are able to manipulate the density of the material by up to 40 per cent, opening the door to the possibility of 3D printing parts with differing densities at different points.